Siemens CPU 1214C – 6ES7214-1HG40-0XB0
- Controller for intro to S7 with flexible expansion options
- Expandable by:
- 1 signal board (SB), battery board (BB) or communication board (CB)
- 8 signal modules (SM)
- Max. 3 communication modules (CM)
The compact CPU 1214C has:
- 3 device versions with different power supply and control voltages.
- Integrated power supply either as wide-range AC or DC power supply (85 … 264 V AC or 24 V DC)
- Integrated 24 V encoder/load current supply:
For direct connection of sensors and encoders. With 400 mA, the output current can also be used as load power supply.
- 14 integrated digital inputs 24 V DC (current sinking/current sourcing (IEC type 1 current sinking)).
- 10 integrated digital outputs, either 24 V DC or relay.
- 2 integrated analog inputs 0 … 10 V.
- 2 pulse outputs (PTO) with a frequency of up to 100 kHz.
- Pulse-width modulated outputs (PWM) with a frequency of up to 100 kHz.
- Integrated Ethernet interface (TCP/IP native, ISO-on-TCP).
- 6 fast counters (3 with max. 100 kHz; 3 with max. 30 kHz), with parameterizable enable and reset inputs, can be used simultaneously as up and down counters with 2 separate inputs or for connecting incremental encoders.
- Expansion by additional communication interfaces, e.g. RS 485 or RS 232.
- Expansion by analog or digital signals directly on the CPU via signal board (with retention of CPU mounting dimensions).
- Expansion by a wide range of analog and digital input and output signals via signal modules.
- Optional memory expansion (SIMATIC Memory Card).
- PID controller with auto-tuning functionality.
- Integral real-time clock.
- Interrupt inputs:
For extremely fast response to rising or falling edges of process signals.
- Removable terminals on all modules.
- Simulator (optional):
For simulating the integrated inputs and for testing the user program.
- Comprehensive instruction set:
A wide range of operations facilitates programming:
- Basic operations such as binary logic operations, result allocation, save, count, create times, load, transfer, compare, shift, rotate, create complement, call subprogram (with local variables)
- Integral communication commands (e.g. USS protocol, Modbus RTU, S7 communication “T-Send/T-Receive” or Freeport)
- User-friendly functions such as pulse-width modulation, pulse sequence function, arithmetic functions, floating point arithmetic, PID closed-loop control, jump functions, loop functions and code conversions
- Mathematical functions, e.g. SIN, COS, TAN, LN, EXP
User-friendly counting functions in conjunction with the integrated counters and special commands for high-speed counters open up new application areas for the user.
- Interrupt processing:
- Edge-triggered interrupts (activated by rising or falling edges of process signals on interrupt inputs) support a rapid response to process events.
- Time-triggered interrupts.
- Counter interrupts can be triggered when a setpoint is reached or when the direction of counting changes.
- Communication interrupts allow the rapid and easy exchange of information with peripheral devices such as printers or bar code readers.
- Password protection
- Test and diagnostics functions:
Easy-to-use functions support testing and diagnostics, e.g. online/offline diagnostics.
- “Forcing” of inputs and outputs during testing and diagnostics:
Inputs and outputs can be set independently of cycle and thus permanently, for example, to test the user program.
- Motion Control in accordance with PLCopen for simple movements.
- Library functionality
The STEP 7 Basic programming package permits complete programming of all S71200 1214c controllers and the associated I/O.
Siemens 6ES7214 1HG40 0XB0, SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/relay, onboard I/O: 14 DI 24 V DC; 10 DO relay 2 A; 2 AI 0-10 V DC, siemens 1214c, Power supply: DC 20.4-28.8V DC, s71200 cpu 1214c, Program/data memory 100 KB