O SIEMENS SIMATIC S7-1500 Analog Input/Output Module 6ES7534-7QE00-0AB0
Overview
- 4 analog inputs/ 2 analog outputs
- For flexible adaptation of the PLC to the corresponding task
- For subsequent expansion of the system with additional inputs and outputs
- For use in the tightest spaces
Application
Analog inputs record process signals such as pressure or temperature and forward them in digitalized format (16-bit format) to the control. They are suitable for the measurement of current (2-wire and 4-wire transmitters), voltage, and resistance, as well as for the connection of resistance thermometers and thermocouples (measurement types depend on the module).
Analog outputs convert a 16-bit digital value into a current or a voltage and output this to the process. They are suitable, for example, for controlling proportional valves or small servo drives.
The following analog input/output module is available:
- AI/AQ 4xU/I/RTD/TC / 2xU/I ST
4 analog input channels;
16Â bit resolution; accuracy +/-0.3%; one potential group; 10Â V common mode voltage; parameterizable diagnostics; hardware interrupts (two upper and lower limit values); calibration during execution time.
2 output channels;
16Â bit resolution; accuracy +/-0.3%; one potential group; parameterizable diagnostics; parameterizable substitute values for the outputs; calibration during execution time.
Module width 25 mm
Design
- Mounting on the S7-1500 mounting rail using one single screw
- 25 mm modules: Standardized 40-pin front connector using push-in technology (cannot be used for 35 mm modules)
- Connectable core cross-sections: 0.25Â mm2Â to 1.5Â mm2Â (AWG24 to 16), regardless of the front connector used
- Prewiring position of the front connector
- Front flap with expandable cable compartment, even if fully wired
- Integrated shielding concept
- Unambiguous labeling on front of module:
- Module type
- Article number
- Hardware and firmware version
- Channel numbers labeling
- Cabling diagram
Included in the scope of delivery:
- Infeed element, shield clamp, and shield terminal
- One labeling strip for manual labeling
- One U connector
- Printed front door
Function
- Uniform display and diagnostics concept:
- Module status display for ERROR (red LED) and RUN (green LED)
- Channel status display (channel activated or deactivated, green LED) or diagnostics display (red LED)
- Display for monitoring the 24Â VÂ DC supply voltage (green LED)
- Supported functions:
- Consistently high resolution of 16 bits
- Identification and maintenance data IM0 to IM3
- Firmware update
- Channel-specific parameter assignment
- Hardware interrupts; two upper and two lower limits can be parameterized
- Channel-granular diagnostics (depends on measurement type/measuring range)
- Calibration during runtime
Reviews
There are no reviews yet.