6GK7177-1FA10-0AA0 Siemens LOGO! CSM 230 Original Brand New
€ 111.30
- 6GK7177-1FA10-0AA0
- LOGO! compact switch
- Supply voltage: 230 V AC
- 4 ports (RJ45)
- Ethernet with 10/100 Mbits/s
- LED diagnostics
- DIN rail mounting
Siemens LOGO CSM 230 – 6GK7177-1FA10-0AA0
Overview
The module is used to connect a LOGO! and up to three other nodes to an Industrial Ethernet network with 10/100 Mbps in an electrical linear, tree or star topology.
The essential features of the LOGO! CSM are:
- Unmanaged 4-port switch, of which one port is on the front for easy diagnostics access
- Two versions for the voltage ranges 12/24 V DC or 230 V AC/DC
- Problem-free connection using four RJ45 standard connectors
- Space-saving, optimized for connection to LOGO!
- Low-cost solution for implementing small, local Ethernet networks
- Stand-alone use for networking any Ethernet devices
Benefits
- Savings on installation costs and space compared to using an external network component
- Fast commissioning, as no configuration is necessary
- Fast and uncomplicated diagnostics access in the control cabinet
- Flexible expansion of the network by simply inserting the CSM
Application
6GK7177-1FA10-0AA0
The LOGO! CSM is an Industrial Ethernet switch in compact, modular design for use in devices of the new LOGO! generation with Industrial Ethernet connection. With the LOGO! CSM, the Ethernet interface of the SIMATIC LOGO! can be multiplied to enable simultaneous communication with control and programming devices, other controllers, or the office world.
Problem-free external access (for diagnostics purposes, for example) is possible via the four Ethernet ports.
Product versions
LOGO! CSM12/24 (in LOGO! 8 design)
- For operation with DC power at a voltage of 12 and 24 volts
LOGO! CSM230
- For operation with alternating voltage of 110 and 230 volts
Design
The design of the LOGO! CSM Compact Switch Modules corresponds to that of the LOGO! components:
- Compact design;
the rugged plastic enclosure contains:- 4 x RJ45 ports for connecting to Industrial Ethernet;
of which one port is on the front for easy diagnostics access - 3-pin connection for the external supply voltage
- LEDs for diagnostics and for status display of the Industrial Ethernet ports
- 4 x RJ45 ports for connecting to Industrial Ethernet;
- Simple mounting on the standard mounting rail
- Fanless and consequently low-maintenance design
Function
- Multiplication of the Ethernet interfaces for logic modules of the product range LOGO! with Ethernet connection (…-0BA7 and -0BA8)
- Design of a small, local Industrial Ethernet network with three further nodes
- Automatic detection of data transfer rate by means of autosensing and autocrossover functions
- LEDs for diagnostics and for status display
Network topology and network configuration
Various network topologies can be implemented with LOGO! CSM:
- Connection of the LOGO! in linear topology:
at least one RJ45 connection of the LOGO! remains vacant, e.g. for connecting a programming device (PG) - Connection of the LOGO! to a higher-level network in a tree/star topology:
at least two RJ45 connections of the LOGO! remain vacant, e.g. for connecting a programming device/operator panel (PG/OP) - Design of a small, local network with a LOGO! and three further Ethernet nodes
Configuration
LOGO! CSM is an unmanaged switch and does not require configuration.
Diagnostics
The following information is displayed on LEDs on the device:
- Power
- Port status
- Data traffic
Integration
Linear structure with LOGO! CSM
Technical specifications
6GK7177-1FA10-0AA0
Siemens 6GK71771FA100AA0, LOGO! CSM 230 Compact Switch Module of connection of a LOGO! (… 0BA7) and up to 3 further nodes to Industrial Ethernet with 10/100 Mbit/s; unmanaged switch, 4 RJ45 ports, 1x front port for diagnostics AC/DC 115 … 240 V
Download
| Weight | 0.195 kg |
|---|---|
| Dimensions | 11.40 × 8.80 × 6.70 mm |
| Brand | SIEMENS |
| product type designation | LOGO! CSM 230 |
| transfer rate | 10 Mbit/s, 100 Mbit/s |
| ● for network components or terminal equipment | 4 |
| number of 100 Mbit/s SC ports | – |
| number of 1000 Mbit/s LC ports | – |
| ● for multimode | 0 |
| ● for single mode (LD) | 0 |
| number of electrical connections | – |
| type of electrical connection | – |
| ● for power supply | 3-pole terminal block |
| type of voltage / 1 / of the supply voltage | DC |
| ● supply voltage / 1 / rated value | 100 … 240 V |
| ● consumed current / 1 / maximum | 0.02 A |
| ● type of electrical connection / 1 / for power supply | 3-pole terminal block |
| ● product component / 1 / fusing at power supply input | Yes |
| type of voltage / 2 / of the supply voltage | – |
| ● supply voltage / 2 / rated value | 100 … 240 V |
| ambient temperature | – |
| ● during operation | 0 … 55 °C |
| ● during storage | -40 … +70 °C |
| ● during transport | -40 … +70 °C |
| relative humidity | – |
| ● at 25 °C / without condensation / during operation / maximum | 90 % |
| protection class IP | IP20 |
| design | LOGO! module |
| fastening method | – |
| ● 35 mm top hat DIN rail mounting | Yes |
| ● wall mounting | Yes |
| ● S7-300 rail mounting | No |
| ● S7-1500 rail mounting | No |
| product function | – |
| ● multiport mirroring | No |
| product function / switch-managed | No |
| standard | – |
| ● for FM | FM3600 and 3611: CL. I, Div2, Group A,B,C,D T4, CL I, Zone 2, Group IIC, T4, Ta=55°C |
| ● for safety / from CSA and UL | UL60079-0, UL60079-15, CSA C22.2 |
| reference code | – |
| ● acc. to IEC 81346-2 | KF |
| ● according to IEC 81346-2:2019 | KFE |
| certificate of suitability / CE marking | Yes |
| standard / for hazardous zone | no |
| certificate of suitability | – |
| ● C-Tick | Yes |
| ● KC approval | No |
| Marine classification association | – |
| ● American Bureau of Shipping Europe Ltd. (ABS) | No |
| ● French marine classification society (BV) | No |
| ● Det Norske Veritas (DNV) | No |
| ● Germanische Lloyd (GL) | No |
| ● Lloyds Register of Shipping (LRS) | No |
| ● Nippon Kaiji Kyokai (NK) | No |
| ● Polski Rejestr Statkow (PRS) | No |
| Internet-Link | – |
| ● to web page: selection aid TIA Selection Tool | |
| ● to website: Industrial communication | |
| ● to website: Industry Mall | |
| ● to website: Information and Download Center | |
| ● to website: Image database | |
| ● to website: CAx-Download-Manager | |
| ● to website: Industry Online Support | |
| security information | Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action(e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) |
| last modified: | 11/6/2021 |
You must be logged in to post a review.
Reviews
There are no reviews yet.