6ES7352-5AH11-0AE0 Siemens SIMATIC S7-300 FM352-5 with PNP Output Original Brand New

• The FM 352-5 high-speed Boolean processor provides extremely fast binary control and also some of the fastest switching processes ever possible (cycle time: 1 µs).
• Programming is possible with LAD or FBD.
• The available set of statements comprises bit statements (partial statement set of STEP 7), timers, counters, frequency dividers, frequency generators, shift registers.
• 12 integral DI / 8 integral DO.
• 2 versions: sinking or sourcing digital outputs.
• 1 channel for connection of a 24-V incremental encoder, a 5-V incremental encoder (RS422) or an SSI absolute encoder.

Micro Memory Card required for use of the FM 352-5

Note:

We offer position measuring systems and preassembled connecting cables for counting and positioning functions under SIMODRIVE Sensor or Motion Connect 500, see under this link.

The FM 352-5 High-speed Boolean processor offers extremely fast binary functions and some of the quickest switching procedures ever possible. The module is already used in many sectors, including:

• Packaging machines
• Printing and paper machines
• Machines for food and beverage production
• Machines for the production of pharmaceutical products
• Printing and punching presses

Examples of controllable sub-processes are:

• Tracking of small accessory parts at high speeds
• Guarantee of “online” quality (faulty parts are removed)
• Guarantee of functions for tool and machine safety
• Logic control of processes without jitter

• S7-300 module, 80 mm wide
• 40-pin front connector for connection of DI, DQ and position encoder
• DQ current sinking or current sourcing depending on module variant
• Shaft for MMC card with FM 352-5 program
• Switch for STOP, RUN and RESET
• Assignment of input/output addresses (16 bytes each) for data exchange with a higher-level S7-CPU
• Operation of the FM352-5 is possible:
  • In a central S7-300 configuration
  • Distributed as a standard PROFIBUS DP slave via IM 153-1/IM 153-2 to a DP port integrated in S7-300, S7-400, WinAC or third-party master
  • Stand-alone operation without higher-level PLC

• Instruction set:
  • Bit instructions:
    NO operators, NC operators, negation, output, connector, RS flipflop, SR memory, recording of positive/negative signal edge
  • Conversion functions:
    Conversion of 16-bit integers into 32-bit integers
  • Comparison functions:
    16/32-bit integers
  • Timer functions:
    Pulse timer, ON delay, OFF delay, each with an accuracy of 10 µs
  • Counter functions:
    16 bit up, 16 bit down, 32 bit up/down
  • Other functions:
    Frequency generator, frequency scaler, bit shift registers, pulse-width modulation
  • Mathematical functions:
    Add, subtract, multiplication, division, absolute value for 16 and 32 bit
• Actual value query: Query of the actual values for
  • Incremental encoders with 24 V signal voltage or
  • Incremental encoders with 5 V signal voltage (RS 422) or
  • SSI absolute encoders.
• Counter functions for incremental encoders
  • Continuous counting
  • Individual counting
  • Periodic counting
  • 16-bit or 32-bit value range
• Integrated 24 V power supply for position encoder
• Selectable times for DE-filter:
  0, 5, 10, 15, 20, 50 µs and 1.5 ms

Mode of operation

• Creating an FM 352-5 program with STEP 7 in LAD or FBD.
• Implementation of simulations and tests on an S7-CPU or with the PLCSIM software simulation.
• Compiling an FM 352-5 program in destination code for the FM 352-5.
• Download the data directly to the module, either directly through the S7-CPU or using an MMC card.
• In RUN position: The FPGA processed the program in a cycle of 1 µs duration.
• Data exchange with the CPU is carried out via the 16-byte I/O interface.

Parameter settings

Parameters are assigned with STEP 7 or COM PROFIBUS and standardized *.GSE files. In order to accelerate the switch-on procedure, the *.GSE file is already operable.