6BK1623-0AA00-0AA0 Siemens SIMATIC PN/J1939 Link Original Brand New

• For data exchange between PROFINET and SAE J1939 networks
• J1939 functions:
  • Broadcast Announce Message (BAM)
  • Connection Mode Data Transfer (CMDT)
  • PDU 1 & 2
• Integrated into Totally Integrated Automation via gsdml file in TIA Portal. No separate software required
• Integrated PROFINET switch with 9-pin Sub-D socket for J1939
• Up to 253 logical nodes
• Up to 30 addressable ECUs
• Galvanic isolation between the two networks
• Diagnostic interrupts
• Controllers supported: S7-1200, S7-1500, ET 200SP, Open Controller

The SIMATIC PN/J1939 LINK integrates seamlessly into PROFINET networks and facilitates data exchange between the network and the SAE J1939 fieldbus. Communication with up to 253 logical nodes is possible.

• S7-1200-type enclosure, width 70 mm
• Can be mounted on a standard DIN rail or a control panel
• LEDs for visualizing the operating states for J1939, PROFINET and PROFINET ports
• Internal PROFINET switch
• Connection to PROFINET PN IO networks exclusively via PROFINET with RJ45 plugs.
• Connection to SAEJ1939 bus via 9-pin Sub-D
• 3-pin connection of the external 24 V DC supply voltage
• Operation without fans or batteries
• Maximum permissible cable length of the J1939 network up to 1 000 m (depending on data transmission rate, cable cross-section, number of participants). Baud rates of 100 kbaud, 250 kbaud and 500 kbaud are supported.

Function