[ez-toc]
Overview
- SIPLUS IM 365: For configuration of 1 central controller and max. 1 expansion unit
Note:
SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.
Application
The SIPLUS IM 365 interface module permits configuration of the S7-300 automation system (CPU 314 or higher), consisting of 1 central controller (CC) and 1 expansion unit (EU) with max. 8 modules each; distance: 1 m.
Design
The SIPLUS IM 365 is the low-cost expansion for an EU. It contains the following features:
- Compact design;
the rugged plastic housing contains the interfaces for the connection cables - Simple mounting;
the interface modules are mounted on the DIN rail (slot 3) and connected to the I/O modules via a bus connector just like any other module - Problem-free configuration;
the interface modules are self-configuring. Address assignment is not required. - LEDs for status and fault display
- One of the two SIPLUS IM 365 modules is inserted in the CC, the other in the EU; the modules are connected by a fixed, 1-m long cable
- Limited use of modules;
the EU is not connected to the C bus. Therefore no C bus stations (CPs and FMs, see configuration aids) may be inserted into the EU - No separate power supply;
the modules in the EU are powered by the CPU power supply
6AG1365-0BA01-2AA0
Siemens SIPLUS S7-300 IM 365 based on 6ES7365-0BA01-0AA0 with conformal coating, -25…+60 °C, connection IM 365 for connection of an extension rack, without communications bus, 2 modules+ connecting cable 1 m
Visit 6AG1365-0BA01-2AA0
For more our products visit turll.com













Reviews
There are no reviews yet.