6ES7144-5KD50-0BA0 Siemens SIMATIC ET 200AL Analog I/O Modules Original Brand New
$341.70
6ES7144-5KD50-0BA0
Siemens SIMATIC ET 200AL, AI 4xRTD/TC, 4x M12, degree of protection IP67
6ES7144-5KD50-0BA0
Siemens SIMATIC ET 200AL, AI 4xRTD/TC, 4x M12, degree of protection IP67
Overview
- 30 mm wide module with parameters and diagnostic functions
- For connecting analog actuators and sensors without additional amplifiers
- 4-channel analog input modules with M12 connection
- 4-channel analog output module with M12 connection
Application
Analog input modules record process signals such as pressure or temperature and forward them in digitalized 16-bit format to the PLC. They are suitable for measuring voltage, current (2-wire and 4-wire transducers), and resistance, as well as for the connection of resistance thermometers.
Analog output modules convert a 16-bit digital value into a current or a voltage and output this to the process. They are suitable, for example, for controlling proportional valves or small servo drives.
The 30 mm wide I/O modules are especially suitable for use in extremely confined spaces, have settable parameters and diagnostic functions and can thus be adapted flexibly to the respective process requirements.
The following analog I/O modules are available:
- Analog input module AI 4XU/I/RTD, 4XM12
- Analog input module AI 4XRTD/TC, 4XM12
- Analog output module AQ 4xU/I, 4xM12
Design
Due to the screw fastening through the front or side in all mounting positions, there are many many different installation options for the I/O modules, both on even surfaces and on aluminum mounting rails using sliding blocks.
The analog I/O modules feature the following:
- A backplane bus connection (ET connection) with M8 connection technology for connecting to an interface module or further I/O modules
- A power supply connection with M8 connection technology with forwarding
- LED display for the channel status
- LED display for the module status (DIAG)
- Labels for the identification of channels, modules and slots
- Integrated cable tie opening
- Clear labeling on front of module:
- Plain text identification of the module type
- Channel numbers labeling
- Interface designation
- Clear labeling on side of module:
- Article number, functional status and FW version
- 2D matrix code (article and serial number)
- Pin assignment of all interfaces
The modules are supplied with labels for the identification of channels, modules and slots. The labels can be mechanically inscribed using commercially available labeling systems.
Function
Uniform display and diagnostics concept:
- Channel status display (channel activated or deactivated, green LED)
- Module status display (DIAG, red/green LED)
Supported functions:
- High resolution of 16 bits
- Channel-by-channel parameter assignment of the measurement types voltage, current, RTD and thermocouple as well as their measuring ranges
- Module-granular diagnostics and diagnostic interrupt
- Hardware interrupts; two upper and two lower limits can be parameterized
- Identification and maintenance data IM0 … IM3
- Firmware update
- PROFIenergy
Download
Visit 6ES7144-5KD50-0BA0
For more our products visit turll.com
| Weight | 0.188 kg |
|---|---|
| Dimensions | 47.00 × 178.00 × 40.00 mm |
You must be logged in to post a review.
Reviews
There are no reviews yet.