[ez-toc]
Overview
The 1 F-RQ digital F electronic module relay DC 24VDC/24.230VAC/5 A has the following characteristics:
- 1 relay output (2 NO contacts)
- Total output current 5 A
- Rated load voltage 24 V DC and 24 … 230 V AC
- The control circuit of the two safety relays must be routed from the outside to the respective terminals
The attainable safety integrity level is SIL 3 (IEC 61508) when the control of the F-RQ module is implemented via a fail-safe output (e.g. ET 200SP 4F-DQ 24 V DC/2 A PROFIsafe).
Note:
SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were adopted from the respective standard products. SIPLUS extreme-specific information was added.
Design
Control must be carried out from the outside via a fail-safe electronic module to the respective IN P and IN M terminals. The ET 200SP 4 F-DQ (6ES7136-6DB00-0CA0) can be used for this, for example.
One channel of the 4 F-DQ module can be used to control a further 1 F-RQ module. The output signal can be looped through for this purpose: OUT P and OUT M of the first 1F-RQ module are wired to IN P and IN M of the second 1F-RQ module.
6AG1136-6RA00-2BF0
Siemens SIPLUS ET 200SP F-RQ DC 24V/24-230V AC/5A based on 6ES7136-6RA00-0BF0 with conformal coating, -30…+60 °C, 20 mm overall width, 1 relay output (2 NO) summation output current 5 A, load voltage 24 V DC and 24 … 230 V AC, can be used up to PL e (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if controlled by F-DQ (e.g. 6AG1136-6DB00-2CA0)
Visit 6AG1136-6RA00-2BF0
For more our products visit turll.com












Reviews
There are no reviews yet.