6BK1621-0AA00-0AA0 Siemens SIMATIC PN/BACnet LINK Original Brand New

• Gateway between PROFINET and BACnet/IP networks according to EN ISO16484-5 and Addendum ANSI/ASHRAE Standard 135-2012.
• Integrated in Totally Integrated Automation via HSP, TIA Portal V14 or higher
• Integrated PROFINET switch and RJ45 socket for BACnet
• 1 000 BACnet objects/object references
• 1 000 subscribe services
• BACnet features:
  • Client & Server
  • Device profile: B-GW
  • Change of value / cyclic and acyclic data exchange
  • Scan of BACnet/IP network
• Supported BACnet object types:
  • Device
  • Binary input
  • Binary output
  • Analog input
  • Analog output
• Supported BACnet services:
  • DS-COV-A/B
  • DM-DDB-A/B
  • DM-DOB-B
  • DS-RP-A/B
  • DS-WP-A/P
  • GW-EO-B
• Galvanic isolation between the two networks
• Diagnostic interrupts
• Controllers supported: S7-1200, S7-1500, ET 200SP, Open Controller

The SIMATIC PN/BACnet LINK connects PROFINET networks to the BACnet building to enable an exchange of data.

This makes it possible for the user to communicate with up to 1 000 BACnet objects.

The configuration is made in the TIA Portal V14 or higher. A corresponding HSP is available to the user. The user has the following options for configuring the communication relationships:

• Import of csv or ede files
• BACnet/IP network scan
• Manual creation

The SIMATIC PN/BACnet LINK has an internal PROFINET switch and can integrate itself seamlessly into PROFINET networks.

• S7-1200-type enclosure, width 70 mm
• Can be mounted on a DIN rail or a control panel
• Connection to PROFINET PN IO networks exclusively via PROFINET by RJ45 connectors
• Connection to BACnet/IP bus via an RJ45 socket
• 3-pin connection of the external 24 V DC supply voltage
• Operation without fans or batteries
• LED for visualizing the operating states of BACnet, PROFINET and Ethernet ports

• PROFINET IO device
• Can be operated as “BACnet Client” or “BACnet Server”.
  Functionality specified during configuration; mixed client and server operation possible.
• The BACnet server is built by creating BACnet objects (analog and binary input and output objects).
• The BACnet client is built by creating references to analog and binary input and output objects which are located on other BACnet devices.
• Data transmission options:
  • Acyclic (programmed from the automation program);
    using the “Read/write data record” services
  • Cyclic (can be parameterized by user in the HSP);
    by updating the IO image
  • Changing values via the COV (change of value) mechanism
• Controllers supported: S7-1200, S7-1500, ET 200SP, Open Controller