6AG1155-5BA00-2AB0 Siemens SIPLUS ET 200MP IM155-5 DP ST Original Brand New
$1,693.41
6AG1155-5BA00-2AB0
Siemens SIPLUS ET 200MP IM155-5 DP ST based on 6ES7155-5BA00-0AB0 with conformal coating, -40…+60 °C, start up -25 °C, PROFIBUS connection for max. 12 S7-1500 modules
[ez-toc]
Overview
- Interface module for linking the ET 200MP to PROFIBUS
- Handles data exchange with the PROFIBUS device in the PLC
- Max. 12 I/O modules
- Automatic detection of baud rate 9.6 kBd … 12 MBd
- PROFIBUS addresses 1 … 125; adjustable using DIP switches
- Identification and maintenance data IM0 … IM3
Note:
SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
Application
The IM 155-5 DP ST interface module enables the connection of ET 200MP to PROFIBUS and handles the communication between the modules and the higher-level PROFIBUS master autonomously in the PLC.
Design
The IM 155-5 DP ST interface module is screwed directly onto the S7-1500 mounting rail. The IM 155-5 DP ST features the following:
- Diagnostics display for error (Error), operation (RUN), and maintenance (MAINT).
- Connection to PROFIBUS using 9-pin SUB-D-connector; one PROFIBUS connector of type 6ES7972-0BB70-0XA0 is included in the delivery scope.
- 24 V DC supply unit for looping through the supply voltage.
- Protection of interface module against unauthorized access possible using lock, seal or cable tie.
6AG1155-5BA00-2AB0
Siemens SIPLUS ET 200MP IM155-5 DP ST based on 6ES7155-5BA00-0AB0 with conformal coating, -40…+60 °C, start up -25 °C, PROFIBUS connection for max. 12 S7-1500 modules
Visit 6AG1155-5BA00-2AB0
For more our products visit turll.com
| Weight | 0.419 kg |
|---|---|
| Dimensions | 150 × 150 × 45 mm |
You must be logged in to post a review.
Reviews
There are no reviews yet.