6AG1507-0RA00-7AB0 Siemens SIPLUS S7-1500 PS 1507 Original Brand New
$2,248.49
6AG1507-0RA00-7AB0
Siemens SIPLUS S7-1500 PS 1507 60W 120/AC 230V/DC based on 6ES7507-0RA00-0AB0 with conformal coating, -40…+70 °C, start up -25 °C, system power supply supplies the backplane bus of the S7-1500 with operating voltage
[ez-toc]
Overview
- System power supplies for the SIMATIC S7-1500
- For conversion of AC or DC line voltages to the operating voltages required for the internal electronics
- 25 or 60 W output power
- Can be used for S7-1500 or ET 200MP
- Engineering and configuration via STEP 7 V12
Note:
SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
Design
Power supplies are screwed directly to the S7-1500 mounting rail and are connected with the upstream or downstream module via a U connector.
The front of the power supply contains:
- Diagnostics LEDs to indicate status and errors:
Error (Error), operation (RUN), maintenance (MAINT)
The power supplies also include:
- On/off switch
- Power supply terminals
Function
Properties:
- Rated input voltage dependent on the type of module
- Output power dependent on the type of module
- Mains buffering
- Galvanic isolation from the bus
The following functions are supported by the power supply modules:
- Firmware update
- Identification and maintenance data I&M0 to I&M3
- Configuring in RUN
- Diagnostic messages
- Diagnostics interrupts
6AG1507-0RA00-7AB0
Siemens SIPLUS S7-1500 PS 1507 60W 120/AC 230V/DC based on 6ES7507-0RA00-0AB0 with conformal coating, -40…+70 °C, start up -25 °C, system power supply supplies the backplane bus of the S7-1500 with operating voltage
Visit 6AG1507-0RA00-7AB0
For more our products visit turll.com
| Weight | 0.614 kg |
|---|---|
| Dimensions | 156 × 150 × 78 mm |
You must be logged in to post a review.
Reviews
There are no reviews yet.