6GK7543-6WX00-0XE0 Siemens Communications Processor CP 1543SP-1 Original Brand New
$927.58
6GK7543-6WX00-0XE0 SiemensĀ
Communications processor CP 1543SP-1 for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet; Security (firewall and VPN) Open IE communication (TCP/IP, ISO-on-TCP, UDP) PG/OP, S7 routing, IP broadcast/multicast, SNMPV1/V3, DHCP, secure email, IPV4/IPV6, support of SINEMA Remote Connect with autoconfiguration, time-of-day synchronization via NTP, access to web server of CPU, bus adapter required.
Overview
The CP 1543SP-1 communications processor connects the ETĀ 200SPĀ Distributed Controller with IndustrialĀ Ethernet networks. By combining a variety of security features such as an SPI (Stateful Packet Inspection) firewall, VPN and data encryption protocols (e.g. SNMPv3), the communications processor protects individual ET 200SP distributed controllers or even entire automation cells against unauthorized access.
The module can also be used for integrating the ETĀ 200SP DistributedĀ Controller into an IPv6-basedĀ network. All functions can be configured with STEPĀ 7Ā Professional, V14 (TIAĀ Portal) and higher.
The CPĀ 1543SP-1 supports the following communication services:
- PG/OP communication
- S7 communication
- Open communication (Open User Communication)
- IT communication
- Sending emails via SMTP or ESMTP with “SMTP-Auth” for authentication on an email server (also with IPv6)
- Support of SINEMA Remote Connect with autoconfiguration
- Security Integrated
- Stateful Packet Inspection Firewall
- Secure communication via VPN (IPsec)
- Protocols for secure communication
- Secure access to the web server of the CPU via the HTTPS protocol
- Secure transfer of the time of day (NTP)
- SNMPv3 for tap-proof transfer of network analysis information
- Integration of the ET 200SP Distributed Controller into IPv6-based networks
Benefits
- Prevention of data loss, production disruptions or machine damage by protecting against unauthorized access to the SIMATIC ET 200SP Distributed Controller and lower-level networks.
- Network segmentation and network separation for setting up identical machines with the same IP addresses
- Connection to SINEMA RC:
With the optional SINEMA Remote Connect, you can benefit from the user-friendly, secure SINEMA Remote Connect management platform for remote maintenance. - Optimum maintenance support thanks to
- Simple diagnostics via the central web server
- Monitoring with IT network management tools (SNMP)
- Module replacement without a PG
- Securing the system against unauthorized access with
- Central access protection for any S7 station
- Secure access to the central web server
- Simple alerting by email
- Protection of investment thanks to easy integration of the ET200SP Distributed Controller in existing networks with SIMATIC S7-300/S7-400/via Industrial Ethernet using the CPĀ 1543SP-1
- Accessibility of the ET 200SP Distributed Controller from an IPv6-based infrastructure
Application
The CP 1543P-1 is used for connecting the ET 200SP Distributed Controller to Industrial Ethernet networks. With its own processor, it relieves the CPU of communication tasks.
The CP 1543SP-1 offers possible communication with:
- PGs/PCs
- Master computers
- Operator control and monitoring systems
- SIMATIC S7 systems
It can be used to protect the ET 200SP Distributed Controller automation system from unauthorized access from an Ethernet network. The CPĀ 1543SP-1 allows secure remote access via a LAN and enables the data transfer between devices or network segments to be protected from data manipulation/espionage.
Design
The CPĀ 1543SP-1 has all the advantages of the ETĀ 200SP design:
- Compact, space-saving design:
- Module powered via separate power supply
- Three LEDs for displaying the operating state and communication state of the module as well as LEDs on the bus adapter.
- Simultaneously operable with BAĀ SendĀ module and CMĀ DPĀ module.
- Simple installation:
The CP 1543SP-1 is mounted on the ETĀ 200SP DIN rail and is connected to the adjacent modules via the backplane bus.- The bus adapter (not included in scope of delivery) makes various connection methods possible;
- For standard environmental conditions, BAĀ 2xRJ45 for connection via RJ45 connector
- For mechanical loading during operation and/or increased EMC requirements
BAĀ 2xFC, BAĀ 2xSCRJ, BAĀ SCRJ/RJ45, BAĀ SCRJ/FC - The CPĀ 1543SP-1 can be operated without a fan; no backup battery is required.
- The module can be replaced without the need for a programming device.
- The CP can be equipped with an equipment labeling plate.
- Optional labeling using light gray or yellow labeling strips. There is a choice of two materials:
- Film and roll with 500Ā strips, for thermal transfer roll printer
- Paper (280 g/m2), DINĀ A4Ā sheets with 100Ā strips each, for laser printer
Scope of delivery:
CP 1543SP-1, 24Ā VĀ DC connector (bus adapter must be ordered separately)
Function
- 2-port interface via BusAdapter with an RJ45 connection with 10/100Ā Mbps full/half duplex with autosensing functionality
- The CP 1543SP-1 communications processor connects the SIMATIC ET 200SP Distributed Controller to additional IndustrialĀ Ethernet networks.
- Communications services:
- Open communication (TCP/IP, UDP, ISO-on-TCP):
Multicast with UDP - PG/OP communication: Inter-network with S7 routing
- S7 communication (client, server)
- S7 routing
- IT communication:
HTTP communication allows access to the web server of the CPU. With the CPĀ 1543SP-1, HTTPS communication is also possible.
The email client function allows e-mails to be sent directly from the user program.
IP address assignment via DHCP for IPv4 or via direct entry in the engineering software and via the T_CONFIG function block
STEP 7 Professional V14 (TIA Portal) or higher
- Open communication (TCP/IP, UDP, ISO-on-TCP):
- Support of SINEMA Remote Connect with autoconfiguration
- Diagnostics and network management:
- Extensive diagnostic functions of all modules in the ET 200SP system
- Integration in network management systems due to support of SNMP v1/v3
- Security mechanisms:
- Access protection with firewall for filtering connections on the basis of their IP and MAC addresses
- Secure communication via VPN (IPsec)
- Encrypted HTML pages using SSL (HTTPS)
- Secure transfer of the time of day (NTPS)
- Configuration of all functions with STEPĀ 7Ā ProfessionalĀ V14 (TIA Portal) or higher
- Module replacement without programming device: All information can be stored on the memory card of the CPU.
6GK7543-6WX00-0XE0 Siemens
Communications processor CP 1543SP-1 for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet; Security (firewall and VPN) Open IE communication (TCP/IP, ISO-on-TCP, UDP) PG/OP, S7 routing, IP broadcast/multicast, SNMPV1/V3, DHCP, secure email, IPV4/IPV6, support of SINEMA Remote Connect with autoconfiguration, time-of-day synchronization via NTP, access to web server of CPU, bus adapter required.
| Weight | 0.202 kg |
|---|---|
| Dimensions | 60 × 74 × 117 mm |
You must be logged in to post a review.
Reviews
There are no reviews yet.